These are the original equipment 125VAC 30W E17 base bulbs used in many Sharp microwave ovens manufactured from 1990-2000. Also used in KitchenAid microwave ovens and Whirlpool microwave ovens. Sold in boxes of 50 lamps. Some lamps have cosmetic blemishes not affecting functionality or life. (The standard version is known as a 30T8) Made in Taiwan.
Also available: 20W, 25W and 40W lamps used in other microwave ovens.
Standard 12.8V 1.04A S-8 SC bayonet base automotive lamps. Bases have significant blemishes/discoloration, not affecting functionality or life. Sold in boxes of 500 lamps. Made in Taiwan.
6V 150mA T3-1/4 22mm (0.87") long 10.4mm (0.41") diameter 5000 hours 1" leads. Made in Taiwan.
Industry #327 - T1-3/4 28V 40mA .34MSCP single contact midget flanged base. 16mm (.63" long) 5mm diameter. Also known as an "aircraft indicator lamp" or "aircraft instrument lamp". High quality. Made in Japan.
110VAC 3W T3-1/4 28mm (1.1") long 10mm (0.39") diameter single contact bayonet base (BA9S). Made in Taiwan.
6.3V 85mA Axial Leads Frosted Glass Approximately T1-3/4 15MM long x 4MM diameter (.59" x .16") with 1-1/2" wire leads. Sold in boxes of 500 lamps. Made in Japan.
Industry #EL-2 8V 12W 1.5A 14.5mm long miniature bayonet base (BA-9S) frosted glass 8V 12W. Good quality. Made in Taiwan.
NE2H neon lamp (T1 size 1.9mA) with attached 47K ohm 1/4W resistor and 2.5" rigid insulated wire leads, covered by shrink tubing. Made in Japan
4W 134.5MM long 15.5MM diameter 0.162 Current (amps) 0.25 UV output (watts) 3000 hours average life miniature bipin base(G5) Made in Korea
15W 457.2MM long 25.4MM diameter 55V T8 G13 Base Made in Japan
Peak wave length 254nM. UV Intensity 1500mW/cm2. Circuit voltage 600V lamp current 6mA, 68MM long x 8.9MM diameter. (2.67" x 0.35"). 37MM arc length. Designed for avionics displays, and originally sold for almost $100 each. Made in Japan.
Shows red color when not lit. Made in Taiwan
Shows red color when not lit. Made in Taiwan
Shows green color when not lit. Made in Taiwan
Intermediate Screw Socket or Lampholder made in Polycarbonate plastic with 2 solder lugs on under surface and internal brass threads. rated 300VAC 1A. Good quality. Made in Japan.
120VAC 60W filaments. Made in Japan.
Standard automotive #1157 brake and turn signal light bulbs with 2 wires coming out of the bulb's base to tap trailer lights into the existing vehicle light systems. Comes with insulated connectors on the wire ends and 14" wires. Available bulk or in blister cards. Made in Taiwan.
Longer version of the taplights shown above. With 28 foot wires. Typically these will be used in towing a car behind a van or trailer. Made in Taiwan.
Strobe Lens in polycarbonate plastic 66mm diameter 37mm high
Strobe Lens in polycarbonate plastic 66mm diameter 37mm high
Strobe Lens in polycarbonate plastic 66mm diameter 22mm high
Strobe Lens in polycarbonate plastic 66mm diameter 8.7mm high